How can I format USB drive in CMD? How to format USB using CMD to NTFS? Can I format a USB using CMD in Windows 10? Don't worry if you have the same questions in your mind.

1. Best Format For Usb Flash Drive
2. Best Flash Drive For Mac
3. Usb Flash Drive For Mac
4. Format Usb Flash Drive For Mac And Windows Desktop
5. Format Usb Flash Drive For Mac And Windows

On this page, you'll learn how to format USB using CMD or CMD alternative tool in Windows 10/8/7 successfully. Pick up the suitable USB format tool for help now:

How to format internal and/or external drive to work properly on Mac and Windows computers? External data storage devices such as USB flash drives, external Hard Disk Drives (HDDs), and Solid State Drives (SSDs) provide one of the easiest ways to transfer files between separate computers without accessing the Internet. I mounted the USB drive on Mac, ran DiskUtililty and erased using MS-DOS. Able to place files from Mac on USB drive. If I insert the USB drive on a Windows machine, Windows indicates that I need to format the drive before I can use it. I click on the “Format Disk” button, a window is displayed indicating the capacity of the drive at 200MB. See full list on anysoftwaretools.com. Jul 22, 2019 Right-click your flash drive and then select Format. In the File System list box, choose exFAT, type in a Volume Label if you want, and then click Start. Click OK to the format warning and wait.

If you prefer an easy and quick way to format USB or you need to format to Ext 4/3/2, pick up CMD alternative format tool for help.

Let's start to format your USB using CMD or its alternative tool and make the RAW, inaccessible, unreadable, and even corrupted USB flash drive, pen drive, memory stick work normally again.

Part 1. How to Format USB Flash Drive Using CMD (Command Prompt)

Applies to: Format USB to FAT32/NTFS, format RAW USB, repair corrupted USB, etc.

USB flash drive is worldwide used for storing data and transferring files. However, sometimes, USB may corrupt or become inaccessible due to RAW or invalid file system, bad sector, or other errors. Formatting USB using CMD is a quick way to resolve these problems.

The following are two detailed guides, illustrating how to format a USB flash drive using Windows Command Prompt that you should strictly follow.

Steps to Format USB (to NTFS or FAT32) Using CMD

#1. Format USB using CMD in Windows 10:

Step 1. Connect USB to your PC and press Windows + R keys.

Step 2. Type cmd in the Search box and hit Enter to bring up Command Prompt.

Step 3. Type the following command lines one by one and hit Enter each time:

• diskpart
• list disk
• select disk + number (Replace 2 with the number of your USB drive.)
• list volume
• select volume + number (Replace 10 with the volume number of your USB flash drive.)
• format fs=ntfs quick (You can also replace NTFS with FAT32 or exFAT.)
• exit

CMD also works to fix Windows was unable to complete the format error in your computer hard drive, USB, or other storage devices.

#2. Format USB Flash Drive using Command Prompt in Windows 8/7:

Step 1. Plug USB in your computer and click the Windows icon and select 'Search'.

Step 2. Type command prompt in the Search box.

Right-click on Command Prompt and choose 'Run as administrator'.

Step 3. On the Command Prompt window, type diskpart and press 'Enter'.

Step 4 Type list disk and press 'Enter'. Check the disk number of your USB flash drive. For example, disk 2.

Step 5. Now type select disk 2 and press 'Enter'. (If the USB number is not 2, replace it with the right one.)

Step 6. Type format fs=ntfs and press 'Enter'.

If you prefer other file system formats, change the command NTFS to the desired one, such as format fs=fat32.

Step 7. Type exit and hit Enter to close the window.

After this, exit DiskPart and you save data to your USB flash drive again. However, as Linux file system Ext2/3 is not compatible with Windows OS, you can refer to a UBS format tool in Part 2 for help.

Part 2. Format USB Using CMD Alternative in Windows 10/8/7

Applies to: Format corrupted USB, format USB to Ext2, Ext3, format FAT32 USB to NTFS, format USB to FAT32, etc. on all Windows OS.

Although CMD is capable of formatting USB flash drive, it's not user-friendly for most Windows beginners. Also, it requires users to remember all command lines while executing operations in Command Prompt.

Also, any importer operation may cause data loss on other storage devices. Here, we would like to recommend you try third-party CMD alternative software - EaseUS free partition manager.

EaseUS Partition Master Free Edition is a perfect CMD alternative tool for USB formatting. With an easy-to-use interface and precise operation, you can use it to format USB easily in only a few clicks.

Tutorial - 4 Steps to Format USB via CMD Alternative in Windows 10/8/7

All levels of users can apply this tool and format USB to usable again in Windows 10/8/7:

Step 1. Launch EaseUS Partition Master, right-click the partition on your external hard drive/USB/SD card which you want to format and choose the 'Format' option.

Step 2. Assign a new partition label, file system (NTFS/FAT32/EXT2/EXT3), and cluster size to the selected partition, then click 'OK'.

Step 3. In the Warning window, click 'OK' to continue.

Step 4. Click the 'Execute Operation' button in the top-left corner to review the changes, then click 'Apply' to start formatting your external hard drive/USB/SD card.

Part 3. Bonus Tips to Fix Errors While Formatting USB Using CMD

According to some USB users, they reported that they encountered some errors while formatting USB in CMD.

Here, we've collected two common errors in formatting USB using CMD, if you get the same errors, don't worry. You can follow the provided solutions to resolve them:

Error 1: Diskpart format fs=ntfs stuck at 0, 10, 11, 12..

If the formatting process gets stuck in DiskPart, as the shown message, don't worry. You have two ways to go:

1. #1. Just wait for the formatting process to complete.
2. #2. Close CMD, turn to EaseUS Partition Master in Part 2 to format your drive.

Error 2: Diskpart has encountered an error: Access is denied. See the System Event Log for more information.

If you come across this issue, click the link below to get rid of the problem:

Data Recovery is not a challenge anymore. EaseUS serves as a dependable data recovery application to retrieve lost data within simple clicks.

The End Line

Due to its portability, flexibility, large storage size, and reasonable price, USB flash drive is still the No.1 external storage device around the world.

While using USB for data transferring or storage, problems with USB flash drives also increase. Formatting USB flash drive is one of the top issues.

On this page, we included two USB formatting tools to help you format USB using CMD or CMD alternative - EaseUS Partition Master. You may pick up a suitable tool and follow the respective tutorial guide to make your USB flash drive work normally.

For an easy and free formatting resolution, take EaseUS Partition Master as your first choice. It's a perfect CMD alternative tool that can help you anytime.

People Also Ask About Format USB Using CMD

Some of you may have more questions about formatting USB. Here we collected some top concerned questions and listed answers below. If you have the same doubts, check out the answers now.

1. Why do you need to format USB flash drive?

Usually, HDDs and SSDs are widely used for OS installation and data storage and removable storage devices like USB flash drives are more used for data transferring and storage. But the USB flash drive may become inaccessible, and you'll need to format it so as to make it work again.

Here is a list of reasons why do you and other USB users need to format the flash drive:

1. 1. RAW, invalid, or unrecognized USB file system
2. 2. USB flash drive corruption
3. 3. Virus infection
4. 3. USB is write-protected
5. 3. Change USB file system to NTFS, FAT32, or Ext 2/3/4 by formatting

2. How to format bootable USB using cmd？

The process of formatting a bootable USB flash drive is almost the same as the process shown on this page. You can apply CMD to format it with the listed steps here:

1. Step 1. Connect the bootable USB drive to your PC.
2. Step 2. Open Command Prompt.
3. Step 3. Type diskpart and hit Enter.
4. Step 4. Type list disk and hit Enter.
5. Step 5.Type select disk + number and hit Enter. (Replace 2 with the number of your USB drive.)
6. Step 6. Type list volume and hit Enter.
7. Step 7. select volume + number and hit Enter. (Replace 10 with the volume number of your USB flash drive.)
8. Step 8. Type format fs=ntfs quick and hit Enter. (You can also replace NTFS with FAT32 or exFAT.)
9. Step 9. Type exit and hit Enter.

3. How to format write-protected USB using cmd?

Here are the steps that you can follow to format a write-protected (read-only) USB using the command lines below:

1. Step 1. Press 'Win + R', type cmd to open 'Command Prompt'.
2. Step 2. Type diskpart and hit Enter.
3. Step 3. Type list disk and hit Enter.
4. Step 4. Type select disk 2 and hit Enter. (Replace 2 with the write-protected device number) and hit Enter.
5. Step 5. Type attributes disk clear readonly and hit Enter.
6. Step 6. Type exit to close the diskpart window.

Once the write protection removing process completes, you can format the USB drive again. You can either apply EaseUS Partition Master, Windows File Explorer, or even the CMD command as shown in Part 2 to format the USB drive.

4. Windows was unable to complete the format, how to fix it?

When you use File Explorer to format the USB flash drive, it warns you that 'Windows was unable to complete the format', don't worry. Here are 7 ways that you can try to fix this error:

1. #1. Use EaseUS Partition Master
2. #2. Use Diskpart Command
3. #3. Use Disk Management
4. #4. Clear Virus and Complete the Format
5. #5. Remove Write Protection and Complete the Format
6. #6. Fix Disk Errors and Complete the Format
7. #7. Repair Bad Sectors and Complete the Format

Note that you can try the above two tutorials to format your USB flash drive and resolve this issue. You can also follow this link to get rid of the Windows Was Unable to Complete the Format error immediately.

By Adela D. Louie, Last updated: August 27, 2019

In today’s technology, if you buy a USB hard drive, you can just simply use it directly using your Mac. However, there are instances that not unless that your flash drive is build to use for your Mac, you will not be able to format it.

Why is this so? The answer to this is because most of the computers actually run on Windows and they actually use a different file format which is known to be the Fat32.

Those drives that are formatted in Fat32 can be used in your Mac for reading and writing but there might be an instance that you might experience some trouble once that you use your macOS native format.

So, in case that you have a flash drive that is formatted into Fat32 or any type of format rather than having a Mac OS Extended or AFPS, then we are going to show you in this article how you could possibly format your flash drive using your Mac.

Part 1: How To Format Flash Drive On Mac

Here are the steps that you need to follow. Do these steps and you will then be able to format your flash drive on your Mac.

Step 1: Go ahead and plug in your flash drive in the USB port on your Mac.

Step 2: After that, go ahead and launch the Finder and click on your flash drive detected by your Mac.

Step 3: See to it that there are no files saved on your flash drive that you no longer need. This is because formatting your flash drive will remove all the data that is stored in it. If there are some files that you want to remain, simply copy these files to your Mac.

Step 4: After getting all the files that you need from your flash drive, go ahead and click on “Applications” and then click “Utilities” and then choose “Disk Utility”.

Best Format For Usb Flash Drive

Step 5: And then, go ahead and click on your flash drive from the sidebar.

Step 6: Once that you have chosen your flash drive, go ahead and click on the “Erase” button located at the toolbar at the top of the window.

Step 7: On the next window that will appear on your screen, go ahead and key in a name for the flash drive that you are formatting from the box next to the “Name” option.

Step 8: And then select a format that you want from the drop-down menu.

Step 9: No, if you have previously stored a data on your flash drive that is highly sensitive, just go ahead and click on the Security Tab.

Step 10: From the security tab, go ahead and choose the level of the security that you want. The more that you move to your right, then the more “passes” the deleted tool will be but it will securely delete your files. However, doing to so will take more of your time to format your flash drive. Teenage mutant ninja turtles arcade 1989 download.

Step 11: After that, go ahead and click on the “OK” button and then click on the “Erase” button.

Part 2: Choosing the Right Format

There are formats that you need to choose from depending on the Mac that you are using. If you are using the macOS Sierra or a later version, then you have to options to choose from. One is the AFPS and the other one is the Mac OS Extended. The question now here is that which one should you choose.

You have to keep in mind that once you have formatted your flash drive into AFPS, then those Macs that are running on macOS that is older than the High Sierra will not be able to recognize it. Ifr flight trainer simulator for mac.

So, if you would want to use your flash drive on Macs that are running on High Sierra, then you have to choose the Mac OS Extended format.

However, you also have to know that AFPS is actually optimized for SSD or “solid state drive” and it includes flash drives.

That is why if you are going to reformat a flash drive on your Mac, then you should definitely choose the AFPS format as it is known to be the most reliable and faster than the Mac OS Extended. But again, that is if you do not have any plans in using it on a pre-High Sierra course.

And lastly, if in case that you would want to use your flash drive as one of your backup options in Time Machine, then you should definitely have it formatted in Mac OS Extended.

This is because Time Machine does not have the ability yet to backup flash drives that are formatted in AFPS. So, if you are using an AFPS formatted flash drive on Time Machine, it will just ask you to format your flash drive into Mac OS Extended.

Part 3: How To Format Flash Drive To Fat32 On Your Mac

Once that you have a flash drive, then what you would need to do is to have it formatted into Fat32. Why? This is because once that you have formatted your flash drive into Fat32, then you will be able to use it on both Windows and Mac PC when you want to save or transfer files with either of the two.

The Fat32 format can be used – read or write – with both Mac and Windows PC and because of this, it makes the device more versatile.

However, there are some limitations that you should need to know such as an individual file should only have a maximum size of 4GB. But do not worry because there is still something you can do about it and that is by formatting it to exFAT.

The exFAT format will not give any limitations on the file size that you are going to store on your flash drive and you can still use it on both Windows and Macs that are running in Mac OS X Snow Leopard or later version. For you to be able to format your flash drive into Fat32, here is what you need to do.

Step 1: Go ahead and connect your flash drive to your Mac.

Step 2: And then, go to Application and then click on Utilities.

Step 3: After that, go ahead and launch Disk Utility.

Step 4: And then, go ahead and click on your flash drive located at the sidebar in Disk Utility.

Step 5: After that, click on 'Erase' in the Disk Utility window.

Step 6: After that, go ahead and enter the name for the flash drive that you formatted.

Step 7: And then, choose the Format menu and then select MS-DOS (FAT32) or the ExFAT.

Step 8: After that, go ahead and click on the 'Erase' button.

Once that you are done with the provided steps for you, your flash drive will then completely wipe out all the data stored and it is re-formatted into either an ExFAT or FAT32 depending on what you have chosen on the previous steps.

Part 4: Getting Your Mac System Run Fast

Now that you have known with how you can format your flash drive on your Mac, now it is time for you to get your Mac cleaned up.

Getting your Mac clean on a regular basis after doing tasks can help your Mac maintain its speed and will also give you more space for your storage.

There is one great option for you to clean up your Mac in no time and this is by using the software called the FoneDog Mac Cleaner.

People Also ReadHow to Fix my Mac Running Slow?The Best iphone Data recovery Free Download on Mac

The FoneDog Mac Cleaner will help you to speed up your Mac with just a few simple clicks. This software can also help you in scanning your Mac faster and find all of your junk files on your Mac.

It also has the capability of checking your Mac's system status which includes your CPU status, your memory usage and more. This way, you will have an idea of what is the data that is actually eating up a lot of storage space on your Mac and which is causing it to perform slower than the usual.

The FoneDog Mac Cleaner will not only help you in removing all of the junk files that you have on your Mac. It can also help you to completely uninstall applications that you no longer use together with all the files that are associated with that app. It can also serve as a Similar Image Finder, an Extension Manager, a Duplicate Finder, and more.

For you to start cleaning up your Mac, all you have to do is to follow all the steps that we are going to provide to you. Do not worry, this is really simple and easy to follow and it will not consume a lot of your time. In addition, the screenshots below are shown under the dark mode on Mac.

Step 1: Download and Install

Have the FoneDog Mac Cleaner downloaded from our official website at https://www.fonedog.com/mac-cleaner/. Once that you have completely downloaded the program, go ahead and have the program installed on your Mac.

Step 2: Launch the Program

After that installation process is complete, go ahead and run the program on your Mac. Once that the program is up and running, you will be able to see on your screen the system status of your Mac. With that information, you will have an idea which files are taking up a lot of space on your Mac.

Step 3: Select Cleaner

Cleaner provides you with the cleaning function for the system, photo, email, files, apps and other fields on your Mac.

Step 4: Choose iTunes Junk

Here, take iTunes Junk as an example to show you how to clean junks on your Mac to make your Mac run faster.
Note: As for the other tools like 'System Junk' and 'Email Junk', the steps to clean up them is the same as that in 'iTunes Junk' tool.

Step 5. Scan iTunes Files

After clicking into the page of iTunes Junk, press the Scan button to start scan all the iTunes backups, Cache, updates and downloads on your Mac.

Step 6: Review and Select Items

After that scanning process is completely done, you will be able to see on the left side of your window screen a list of category folders of all the junk files of iTunes that you have on your Mac. If you click each folder, you will see on the right side of your screen all the items that each folder contains.

Best Flash Drive For Mac

Review each item on each folder for you to make sure that all the junk files shown on your screen are unnecessary any more.

Usb Flash Drive For Mac

Once that you are satisfied with the result, you can go ahead and simply click on the 'Clean' button to clean up all your junk files.

Step 7: Confirm Your Choice

There would be a pop-up window called Confirmation turning up. Please press the 'Confirm' button if you are sure to delete the selected files; otherwise, please press the Cancel button and return to the previous page.

Step 8: Cleaning Done

Format Usb Flash Drive For Mac And Windows Desktop

Once that the cleaning process is done, all those unnecessary files that you have there will all be deleted from your Mac.

Part 5: Conclusion

Format Usb Flash Drive For Mac And Windows

Now, as you can see, formatting your flash drive on your Mac is a very easy thing to do. All you need to have is the knowledge on how you can do.

And keep in mind that if you are going to format your flash drive, make sure that you choose the right format so that you can use it in any PC.

Formatting is easy, just like in cleaning up your Mac. Getting your Mac tidy is one of the best things that you should do for you to be able to maintain the speed of your Mac and of course for you to get more space on your storage. And the best way for you to clean up your Mac is by using the FoneDog Mac Cleaner.