Active Console Commands

Kingdom Come deliverance Wiki is your guide for all information on weapons, armor, skills, abilities, crafting, mining, fishing, cooking, brewing and walkthroughs. How to use console commands in Kingdom Come Deliverance: To access Kingdom Come Deliverance’s debug console window, simply press the Tilde key. Below is a list of console commands known for Kingdom Come Deliverance: Note that when you see the value « XX » on a command line, you must remove these two « XX » to add your own value. The following command list for Kingdom Come: Deliverance will enable you to modify the gameplay according to your preference, either changing the game or making it easier to complete. The commands need to be entered in the console, enabled by pressing the tilde key.

Enable crosshair with bow:

wh_pl_showfirecursor 1

This enables a crosshair when using a bow. This makes the aiming significantly easier. If you have a bow equipped when you change this setting, you have to re-equip it to see the crosshair. Set the integer to 0 to disable the crosshair when firing the bow.

Modify motion blur mode:

r_MotionBlur 0

This option can be found in the Graphics settings. However, it can be changed manually. Set the integer to 0 to disable motion blur, set it to 1 for camera blur, and 2 for object blur.

Disable HUD:

g_showHUD 0

To disable HUD, set the integer to 0, to enable set it to 1.

Modify gravity:

Kingdom Come: Deliverance Console Commands | PC Gamer

p_gravity_z -13

This option is listed on the wiki, and it is accepted as a command in-game, but it doesn’t appear to do anything. It’s worth trying, if you’re curious. The default value is -13.

Disable compass:

wh_ui_showCompass 0

Use this to disable only the compass. Useful if you want a non-modded method of increasing realism.

Modify FOV:

cl_fov 60

This setting can be found in the Graphics settings, but it only goes up to 75. The default value is 60. I recommend 90-100 for maximum experience without a lot of model clipping or unintentional texture glitches.

Quit to desktop:

q

This command is just the letter q. I see little use for this, unless you need to quit without saving.

Modify draw distance:

e_ViewDistRatio 500

The default value for this is 500. This will adversly affect performance, be cautious when adjusting this.

Modify tree draw distance only:

e_ViewDistRatioVegetation 500

The default value for this is 500. Just like the previous setting, this will adversly affect performance, on a lesser scale than the previous, however.

Modify other plant draw distance:

e_MergedMeshesInstanceDist 20

This will affect your performance the least out of these three console commands, but it will still have an effect. The default value is 20.

Show time of day:

e_TimeOfDay

This shows the current time of day. (or night.)

Adjust model scale:

t_scale 1

This command adjusts the in-game model scale. Default value is 1, max value is 10. Appears to be somewhat buggy, be cautious if using.

Modify anti-aliasing mode:

r_antialiasingmode 0

Default value is 0, can be changed to 1 for SMAA 1x, 2 for SMAA 1TX, 3 for SMAA 2x. This will adversly affect performace. These options can also be found in the Advanced Graphics options.

Disable Health bar:

wh_ui_showHealthbar 0

Default value is 1. Set the integer to 0 to hide the health bar, set it to 1 to enable it.

Disable dialogue subtitles:

wh_dlg_chatbubbles 1

Default value is 1. This enables or disables the subtitles that appear above NPCs when walking around towns. Set the integer to 0 to hide the subtitles, set it to 1 to enable it.

Disable VSync:

r_vsync 0

Use this to disable VSync to potentially increase performance. It is important to note that disabling this will allow screen tearing to occur. Set the integer to 0 to disable VSync, and 1 to re-enable it.

How to use the console commands in Kingdom Come: Deliverance and disable the HUD for those oh so great screenshots!
Other KC:D Guides:

• Ancient / Treasure Map Guide.
• How to Get Money for Lockpicks at the Talmberg.
• Tricks of the Trade Quest.
• Pestilence Quest.

How to Use Console Commands

Commands for this game are pretty basic, and act a lot like Skyrim console commands, so you shouldnt have a problem learning them. To use the console, press ~, then input the code and press Enter.

How to Enable / Disable Interface

• g_showHUD 0 – Disables HUD.
• g_showHUD 1 - Enables HUD.

Graphic Commands

Kingdom Come: Deliverance Console Commands – Useful Codes ...

• r_Motionblur 0 – Disables motion blur.
• cl_fov X – Sets the field of view to X (default is 60).
• e_ViewDistRatio X – Changes the distance at which objects start to render (default is 500).
• e_ViewDistRatioVegetation X – Changes the distance at which trees start to render (default is 500).
• e_MergedMeshesInstanceDist X – Changes the distance at which grass is animated (default is 20).
• r_vsync 0 - Disables Vsync.
• r_depthofFieldmode 0 - Disables Depth of field durring dialogue.

Kingdom Come Deliverance Wiki Console Commands List

Gameplay Commands

• e_TimeOfDay – Shows the current time.
• wh_pl_showfirecursor 1 – Adds a reticule when aiming a bow.
• p_gravity_z X – Changes the intensity of gravity (default is 13).

Items & Money

• wh_cheat_money X – Gives a certain amount of money.
• wh_cheat_addItem [X Y] – Gives X amount of item with the Y ID.

Note: All Item Commands!
Recommended for You:

• All Kingdom Come Deliverance Guides!

You May Also Like: